Skip to content
Version 1.0.0

Troubleshooting and FAQ

Dispatch ​

A stop cannot be placed ​

Open the Unassigned list and point at the stop's reason chip. Each reason and what to do is in Why a stop is left over. The most common: No location (fix the pin), Needs skill (no driver and vehicle on the roster have it together; check the spelling of the skill), Time window (nobody can get there in time). Suggest shows, for every trip, why it cannot take the stop.

Optimize left many stops unassigned ​

Check the roster first: drivers marked off, or with short hours, are the usual cause. Then check that the waves' food ready times are right (Waves).

A trip says "Driver unavailable" or "Vehicle double-booked" ​

The roster changed after the trip was built: the driver is now off, or their vehicle is also given to someone else at the same time. Change the trip's driver or vehicle (trip ⋯ → Change driver or vehicle…) or fix the roster.

Undo is blocked ​

Undo cannot rewind work a driver has done. Change the plan by hand instead.

I cannot unpublish ​

Once any trip of the day has started, the day can no longer be unpublished. Change the trips directly: drivers see each change.

A driver is running late ​

Open Live. If there is a Late risk alert with a suggestion, click Apply. Otherwise open the driver's card and use Re-optimize from here, or drag stops that are not on board (pickups, or stops of a later trip) to someone else. Tell the customers who will be late. More

A driver's phone shows "No signal" on Live ​

Usually the phone is locked or the driver is in a maps app. The trip goes on; ETAs continue from the plan; the driver's taps arrive later. Call if it matters, and help the driver set up always-on tracking.

"Suggestion no longer applies" ​

The trip changed after the suggestion was made (the driver arrived somewhere, someone moved a stop). Look at the trip and use Re-optimize from here if needed.

NetSuite import failed ​

No orders were changed. Try again in a few minutes; check Settings → Integrations (Test connection); meanwhile export the orders from NetSuite as CSV and use Upload CSV….

The map shows routes on a plain dotted background ​

The street map is not installed on the server, or could not load. Planning works exactly the same. Tell the server administrator. (If the map loaded before, the map says Basemap unavailable, showing routes only when it could not load the streets.)

The routes are straight lines ​

The road engine is not answering (for example in the first hours after installation, while it builds the road map); straight-line estimates are used and drive times are rougher. Settings → Integrations → Road routing shows its state.

The screen says "A newer version is available" ​

The server was upgraded. Click Reload when convenient. Nothing is lost.

The Live dot at the bottom left says "Offline" ​

The live connection to the server dropped. It reconnects by itself; until then, screens refresh when you act on them.

Drivers ​

"That phone number and PIN don't match" ​

Check the number (the one dispatch has for you) and the PIN. Dispatch can set a new PIN in Drivers → Drivers. After several wrong tries, wait a few minutes.

"No trips yet" ​

The day is not published yet, or you have no trip today. Pull down to refresh; call dispatch.

"Location off" ​

The phone blocks location for the app. Tap the red button for the steps to allow it again. More

"This stop is no longer on your route" ​

Dispatch moved it to another driver or cancelled the order. Go back to Today.

"Dispatch did not accept N updates" ​

Something you did while offline no longer fitted, because dispatch changed that stop. Call dispatch. More

The screen keeps turning off ​

Turn on Screen on at the top of Today during a trip (or Keep screen awake in Settings). If the phone cannot do it, raise its auto-lock time.

FAQ ​

Can two dispatchers work on the same day? Yes. Each sees the other's changes within seconds. If you both change the same trip at the same moment, the second change is refused with a message and a Retry button.

Do I have to publish again after each change? No. Once a day is published, every change reaches the drivers and NetSuite at once.

Can I plan tomorrow while today is running? Yes. Move to tomorrow with the arrow: each day has its own plan, roster and orders.

Does Routisserie change orders in NetSuite? It writes the assignment (driver, vehicle, sequence, planned arrival, mileage) onto each sales order. It does not change what the customer ordered, the address or the date.

Where is the version number? At the top of every page of this guide, on the sign-in page, in About Routisserie (click the logo at the top of the left-hand bar), and at the bottom of the driver app's Settings.

Routisserie 1.0.0 · User's Guide